Can you save a Wacom tablet with broken USB port?

You may have already read on ZeMarmot’s Twitter a few days ago but I thought a short post may be worth it. Lately Aryeom’s Wacom tablet (Intuos 5 M) had been acting up until finally the USB port was not working at all (not the cable — of course we checked! 😛 — but the port side on the tablet).

Apparently quite a common problem with Wacom Intuos tablets (like very common; I could find many reports on the web about such problem) and the after-sales of Wacom is quite expensive unfortunately. Some people would open and solder the USB back themselves successfully. On the other hands, I could read at least one comment by someone who failed and bricked the tablet this way. Also I have not soldered anything for years and I don’t have a good soldering iron anymore.

We also had the wireless kit, so we wondered if this could not be our solution: why plug the tablet at all? But it still requires the tablet to work on battery and this one is charged… by the same USB plug! Back to case 1. But then I checked the battery, realized it looked like a very common phone battery (comparing to a Galaxy S2 battery we had there, it was the same voltage, just a slightly different form factor). So yes the solution was simply to buy a 8€ universal charger, and a second Wacom battery so that we can use one in the tablet while the other is charging.

Wacom battery charged on universal charger…
Wacom battery charged on universal charger…

And tadaaa! Wacom tablet fixed for just a few bucks! 🙂

I’m just letting this small trick out there as a possible alternative to soldering yourself your graphics tablet, in case this happens to you too.

P.S.: yes it is written on the battery to only use the specified charger. But what do you want? We do what we can. 😉

 

 

Reminder: was it helpful? If you like our posts, you can
always support our animation film project, "ZeMarmot"
(Creative Commons by-sa), made with Free Software, for
which we also contribute back free software code, open data,
articles…
Fund us in USD on Patreon or in EUR on Tipeee! :-)

Report of GUADEC 2016

Hi all!

So this year was our first GUADEC, for both Aryeom (have a look at Aryeom’s report, in Korean) and I. GUADEC stands for “GNOME Users And Developers European Conference”, so as expected we met a lot of both users and developers of GNOME, the Desktop Environment we have been happily using lately (for a little more than a year now). It took place at the Karlsruhe Institute of Technology in Germany.

Apart from some people we knew from Libre Graphics Meeting events over the years, we met a lot of new faces, and that’s very cool. We have to spread ZeMarmot love, right?! 🙂

IMG_20160812_144317

My first impression is the remarkable organization of GUADEC. They planned social events every day (barbecue, picnic with football, beer nights, dinners… even an ice cream truck at free price!), very well planned schedules, efficient sponsorship, workshops and hackfests, a cake for the 19th birthday… They know their geeks and we nearly never ran out of coffee (well, excepted during the hackfests ;-()!

GUADEC opens with a huge barbecue!
GUADEC opens with a huge barbecue!
GUADEC picnic
GUADEC picnic

Of course, we were not here just for the beer, there were a lot of very cool talks. I was quite interested into Endless and their OS based on GNOME. It was interesting to see the design experiment around GNOME maps too. There were also a bunch of discussion relative to security, and definitely the project on everyone’s mouth was Flatpak. This is clearly a technology that a lot of people have been waiting for, and the center of many discussions.

But also the small feedback that we got on how the GNOME Foundation works was quite insightful. Obviously this is only a small piece of it, but being able to participate and view some of the decision process, discuss about the money that the foundation had been able to raise, how it should be used, about new events around GNOME (like LAS GNOME). This all felt like an exciting time and a cool community to be part of.

IMG_20160812_145043

Another of my activities was trying to get designers interested into GIMP. For people who have followed my work a little, you know I have been really involved into getting GIMP a design revival (taking over the GUI wiki, creating an official GIMP GUI mailing list, trying to make other developers interested into this topic again and proposing some ideas here and there…), yet with very limited success so far (well I had some, but would really love if things could go forward at a better pace). I think GIMP is clearly a great software, both historically and technically. Historically because it is the root of several awesome technologies, like GTK+ (no GNOME without, right?) or lately GEGL, and because many people would call it a “flagship” for Free Software. But great technically as well: I am very amazed how good the code is. It has its zones of darkness (every software has, especially after more than 20 years of existence), because it is still well organized, clean, following clear coding standards with quality code. There is obviously a good technical maintainership. Now the GUI is less than perfect. Not because it is flawed, but because it follows here too 20-year-old design standards. Any software this age has this kind of problem, especially with design paradigms evolving faster and faster. Yet I believe a software that great deserves a chance to get a new face. So what’s the link to GUADEC? Well I have tried to approach various GNOME designers and getting them interested to GIMP again. If you are one of these designers I approached, hopefully I convinced you to give it a try. If I didn’t approach you, I may just not have known who you are, and do not hesitate to come to me. I am not saying that any complete huge redesign will happen overnight. But you definitely have open ears and we, at GIMP, are willing to discuss how to make a better user experience! We can start small.

Another reason for our presence was obviously to present our project: ZeMarmot. We were quite pleased to discover that some people knew about us. I was clearly going there thinking we would be like total strangers. But not only did some people recognize us, but we even had someone telling us his daughter was a huge fan. What? We got our first fan girl?

By the way, they had this badge machine, so while we were there, we printed and created our first hand-made badges of ZeMarmot. About 3 dozens of them. They are therefore quite exclusive so if you got some of them while being there, don’t throw them away!
Oh and by the way, that’s Creative Commons by-sa badges, like our movie! 😉

IMG_20160813_163038

IMG_20160813_163834

IMG_20160813_163851

IMG_20160813_162921

For people interested into our talk, here it is! You’ll see some quite exclusive contents with a few seconds of some cuts of the pilote. Enjoy!

And so here we are, ready to leave Germany. This was a very interesting event. We may come back next year, who knows? Only regret I have is that I was really hoping to participate to a workshop, but since our hotel was already booked, it was not made possible. Well next year maybe…

IMG_20160814_181727

So thank you GNOME for the event and also for sponsoring our travel there! 🙂

ZeMarmot sponsored by GNOME

ZeMarmot talk livestream (GUADEC)

A small reminder that we are currently at GUADEC!

ZeMarmot's director at GUADEC 2016
ZeMarmot’s director at GUADEC 2016

As we said in our last post, tomorrow at 11:45 AM (Central European Time), we’ll have a talk about the status of ZeMarmot with some contents (i.e. few seconds of animation in progress) and our view on using GNOME and Free Software for media creation.

So if you are around Karlsruhe (Germany), do not hesitate to come by (GUADEC is a free GNOME event) at the Karlsruhe Institute of Technology. Otherwise, you can see us on the live streaming of the event (direct link for live streaming) and the recording will remain viewable afterwards from the CCC streaming website.

See you there!

ZeMarmot at GUADEC 2016

Hello everyone!

Just a quick post to tell everyone that ZeMarmot project will be present at GUADEC 2016.

ZeMarmot is speaking at GUADEC 2016!
ZeMarmot is speaking at GUADEC 2016!

GUADEC is “the main conference for GNOME users, developers, foundation leaders, individuals, governments and businesses worldwide” and this year, it will be held in Karlsruhe, Germany from August 12 – 14.

ZeMarmot sponsored by GNOME

We are all happy users of GNOME here, and this is the first time we will be in GUADEC, so this is pretty exciting. Both Aryeom, the film director, and myself, Jehan, are sponsored by the GNOME Foundation to present our film, produced with FLOSS, in room 1, on Sunday, August 14. We will talk about the movie, its current status, about our work on GIMP too, how GNOME and Free Software works in a media creation workflow, and so on. So we hope you will be many to check this out if you are around!
There are a lot of other very cool talks for the whole 3 days of conference, so if you come by, I have the feeling you won’t regret it. 🙂

Of course, if you happen to come across us in between talks, or during the hackfest days, don’t hesitate to come and say hi! Here is what we look like so you can recognize us:

Aryeom & Jehan by Patrick David
Aryeom & Jehan by Patrick David.

Have fun everyone, and maybe see you at GUADEC! 🙂